Malfunctions – Diagnosis – Repair
Assembly and instruction manual
100 / 124
BL164 GB Edition 07/2017
10
Malfunctions – Diagnosis – Repair
WARNING
Troubleshooting and rectification of malfunctions only to be carried out
by persons specially trained and authorized for this.
If possible, before troubleshooting lower the load to the ground!
Immediately discontinue operation if faults occur that endanger
operational safety!
10.1
Malfunction table
In the following table you will find potential faults and the appropriate
remedial action.
Malfunction
Cause
Remedial action
BatteryLadderLIF
T
does not move
(blue illuminated
ring around the
ON
/ OFF
switch is off)
ON / OFF
switch not actuated
No battery in the
BatteryLadderLIFT
Battery empty
Battery temperature less than
-20 °C or more than 60 °C
Fuse [35 A] (-F1) in the switch
box has tripped
Fine fuse [2 A] (-F2) in the
switch box has tripped
Turn on the
ON / OFF
switch
Insert the battery
Change the battery or
dismantle it for charging.
(Refer to Chapter 10.1.4)
Remove battery and allow to
warm/cool to operating
temperature.
Replace the fuse
(see Chapter 10.1.1).
Replace the fuse
Summary of Contents for Battery Ladder Lift
Page 2: ......
Page 3: ...General information BL164 GB Edition 07 2017 3 124 Assembly and instruction manual...
Page 123: ......
