GEDA Battery Ladder Lift, Assembly And Instruction Manual

Page: 107 / 124

Malfunctions – Diagnosis – Repair
BL164 GB Edition 07/2017 107 / 124 Assembly and instruction manual
10.1.4 Replace battery
If the battery has been drained, it can be changed on the assembled
base unit.
CAUTION
Because the battery is located on the underside of the base unit,
travelling down to the ground with empty battery must not be
done !

Carefully turn the catch lever (1A)
to the right until it engages easily.
WARNING
Risk of injury
Do not turn
the catch lever (1A)
further
to the right than shown in the
figure since otherwise the roller guide unlocks and the base unit drops
out of the guide rails of the ladder!
Replace the battery only while the base unit is suspended by the
taught webbing or while the base unit has been placed on the floor !

Press the interlocking and lift
battery over the catch lever when
pulling it out.

Slide the charged battery in the reverse order into the base unit.
The battery must engage audibly.

Push the catch lever (1A) all the
way to the left to securely lock
the roller guide again.
1A
Stop
1A