WARNING
Install the step on a flat surface.
Do not jump or dive from the step.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer’s instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
MAJESTIC 8005 WITH DECK
Sand
15 lbs
Sand
Contents of accessory box
Majestic step Shell
(not included)
SCREW KIT 140-0027
A
1)
Assemble the two
handrail halves.
2)
Insert the handrail
into the recesses.
3)
Fasten the handrail
to the step using the
screws, washers and
nuts provided.
x6
x4 x4 x4
(3 IN.)
(1
¹⁄2
IN.)
x10
(
³⁄4
IN.)
x6
A B C D E
Required tools
(not included)
Phillips #2
Phillips #3
7/16 wrench
Phillips bit
x2
D
B
x6
B3)
Twist the Step Cup to ensure that
the mushroom ring has entirely cleared
the wall thickness. If it has, the suction
cup should rotate freely.
.
CAUTION
Failing to install the Step Cup
TM
system will greatly reduce the steadiness of the step and will void the
manufacturer warranty.
Insert the six Step Cups
TM
in the holes under
the step.*
B1)
Insert half of the Step
Cup mushroom ring in
the hole, at a 45 degree
angle.
B2)
With a flat screwdriver, compress the Step
Cup mushroom ring while pushing it into the hole.
* View step cups installation tips on YouTube:
https://www.youtube.com/watch?v=W5RH1VNxpu0
REV. 03/05/2020 PN:
PG:1
2257 route 139
Drummondville, Québec
J2A 2G2
1 year on pool step.
1 year on hardware.
MANUFACTURER WARRANTY
WWW.INNOVAPLAS.COM
A
x4
x4
x4
B
C