6. OUTPUTS
Two balanced, male XLR type OUTPUT connectors are provided to loop-thru signal from one REVELATION
SR 618WA to another REVELATION SR 618WA, active speaker or power amplifier.
7. LED INDICATORS
CLIP (RED LED)
Shows OUTPUT capability is being exceeded, with clipping distortion.
SIGNAL (GREEN LED)
Shows signal is present on the REVELATION SR 618WA.
POWER (AMBER LED)
Illuminates when main power supply is active on the REVELATION SR 618WA.
8. PHASE SWITCH
Compensates for having REVELATION SR 618WA and main speakers in different locations. Ideally,
REVELATION SR 618WA sound should reach the listening position at the same time as sound from the main
speakers. However, if the distance from the listening position to the REVELATION SR 618WA, and from the
listening position to the main speakers differ, the sound from each will reach your ears at different times. The
PHASE SWITCH, when switched to “REVERSE”, delays the signal by 180 degrees, so the REVELATION
SR 618WA output will blend into that of the main speakers. At the listening position, listen to the mid-bass
output. If it sounds weak, set PHASE SWITCH back to “NORMAL”.
9. HF ROLLOFF FREQUENCY CONTROL
This crossover control allows you to adjust the upper limit of the REVELATION SR 618WA’s response from
30Hz to 160Hz. The REVELATION SR 618WA’s response will begin rolling off above the set frequency. Set
the crossover frequency to the lowest frequency response rating of the main speakers.
10. GAIN CONTROL
This knob is used to regulate the output level of the REVELATION SR 618WA. Use this to set the balance
between the main speakers and
the
REVELATION SR 618WA.
11. AC POWER CORD RECEPTACLE
The
REVELATION SR 618WA
is provided with a detachable power cord. This cord must be attached to the
IEC receptacle on the REVELATION SR 618WA
before the cord is plugged into the AC wall socket.
12. VOLTAGE SELECTOR
This switch is pre-set at the factory for the proper local voltage, so there is no need to change the switch
setting. For 110V operation, set the VOLTAGE SELECTOR to 110V.
WARNING:
Always ensure you have the appropriate voltage rating selected on your
REVELATION SR 618WA before plugging in to an AC outlet. Connection to an
inappropriate power source may result in fire or electric shock, and extensive
damage which is not covered by the warranty.
______________________________________________________________________________________
3
3
© GECKO MUSIC GROUP. All Rights Reserved.
