CONNECTING AND DISCONNECTING THE MICROPHONE
CONNECTING AND DISCONNECTING THE MICROPHONE
1. Insert the XLR (female) connector into the microphone as shown above. If necessary, rotate the
connector to align the key on the connector and the groove in the microphone. Push the connector
into the microphone until it clicks.
2. If you are connecting to a balanced audio device, be sure to use balanced configuration on the XLR
and TRS type connectors. Pin 1 (Shield) = Ground, Pin 2 (Tip) = Positive (Hot), Pin 3 (Ring) =
Negative (Cold). If you are connecting to an unbalanced audio device, make sure you bridge Pin 1
and Pin 3 on the connectors.
3. To unplug the connector from the microphone, press the tab before pulling the connector out from
the microphone.
______________________________________________________________________________________
3
3
© GECKO MUSIC GROUP. All Rights Reserved.
Groove
Key
Tab
