Gecko M-CLASS MC-MP-SBD, Owner'S Manual

Page: 42 / 47

MC-MP-SBD O wner’s Manual 41
Pump starts by itself for 1 minute on several occasions and
"Filter" indicator is flashing. (Also see page 39)
Not a bug, but a feature! The Smart Winter Mode is protecting
your spa from the cold by turning pumps on for 1 minute several
times a day to prevent water in pipes from freezing.
The system has detected air cold enough to freeze water in the
pipes and has activated Smart Winter Mode for a 24-hour period
(when pumps are not turned on within 2 hours, they are
activated).
Filter cycle has stopped and "Filter" indicator is flashing.
(Also see page 36)
Not a bug, but a feature! This indicates that either:
a) the filter cycle is in a 40-minute time-out to avoid ozonator
activation while the spa is being used; or
b) the system has cancelled a filter cycle after 3 hours because
water temperature exceeds set point by more than 2˚ F in order
to prevent excessive water temperature.
"H eater" indicator flashes when pump is on at high speed.
(Also see page 22)
Not a bug, but a feature! The system is turning the heater off
when pump is on at high speed to limit the amount of electrical
current drawn (when jumper JMP1 set to "LC" mode).
The display panel is flashing.
A power failure has occurred. Press any key to reset the system.
Alarm Displays
Alarm & Error Displays