CONTROL ELEMENTS
CONTROL ELEMENTS
FRONT PANEL
FRONT PANEL
1. POWER SWITCH
Use this switch to switch your power amplifier on.
2. CHANNEL A ATTENUATOR CONTROL
In STEREO mode, this attenuator allows the adjustment of CHANNEL A input level. The lowest gain level is
marked as “-inf” and the highest is set at “0dB”. In BRIDGE/PARALLEL mode, this attenuator allows the
combined gain adjustments of both CHANNEL A and CHANNEL B at the same time. CHANNEL B attenuator
control is disabled in BRIDGE/PARALLEL mode.
______________________________________________________________________________________
3
3
© GECKO MUSIC GROUP. All Rights Reserved.
7
1
+
+
+
7
8
8
3
2
4
4
5
6
NOTES:
When your power amplifier is first powered up, the red PRO LED indicator
will illuminate while the cooling fans will rotate at higher speed (start up temperature
control measure); after approximately 6 seconds, the red PRO LED indicator will
distinguish and the cooling fans enter ultra quiet cooling mode. The green PWR LED
indicator illuminates when the power amplifier is switched on, indicating your power
amplifier is active.
6
9
9
