Gecco DROPMASTER Mini E, Operation Manual

Page: 6 / 14

11. Make sure Dropmaster is operating before breaching sprinkler system. When
approaching sprinkler head a slight vibration from the siphon effect will be noticed at the
base of sprinkler head. If you do not notice this vibration make sure Dropmaster is
running.
13.
Caution – The number of sprinkler heads that can be changed at a time on a sprinkler
system when utilizing the Dropmaster depends entirely on the size of the system, the
amount of trapped water and the efficiency of the fitters. Generally speaking changing
up to three heads at one time may not present any problems. In order to ensure that the
Dropmaster system works as intended experienced persons familiar with the operational
features of the Dropmaster siphoning system should determine the number of heads that
can be changed simultaneously.
14. When using the Dropmaster, periodically check the reservoir tank and drain water
from the reservoir tank.
15.
When project has been completed, disconnect the Dropmaster and return sprinkler system
to service. Make sure customer/owner notifies alarm company that work is complete.
Monitoring company should begin to monitor sprinkler system again. Follow normal
procedures.
16. When you are finished using the Dropmaster drain all water from tank, check
electrical cord, vacuum hose and coupling for wear. Flush tank after each use.
Check and clean both strainers in the automatic draining system. Keep the strainers clean
and free of any debris at all times.
-5-