INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
The thermostat must be installed directly into the 3 module pattress box
(flush-mounted installation). The recommended height from the floor is 1.5
metres in a dry place without air currents and far away from heat sources.
1 Carry out the electrical connection as in Pic. 2.
2 Choose the
holder plate
to utilise on the basis of requirements (SWITCH
PLATE “A”, SWITCH PLATE “B”, SWITCH PLATE “C” or SWITCH PLATE “D”).
3 Adapt the attachment of the
holder plate
on the basis of the required switch
plate.
4 Attach the
holder plate
to the base of the
thermostat’s housing
.
N.B.
T-Touch
: Thanks to the
holder plate
the most diffused domestic series
of switches and accessories on the market can be mounted and easily adapted.
Pic.1
Connection to the burner, wall-
mounted boiler, air-conditioning
system and the spring return zone
valve:
Connection to the zone valve.
Pic.2
HOLDER PLATE A
HOLDER PLATE A
HOLDER PLATE A
HOLDER PLATE A
HOLDER PLATE A
Using this
holder plate
the following domestic switch series can be mounted
1•
AVE Banquise
and
Noir
series.
2•
VIMAR Idea
and
Rondò
series.
3•
BTICINO Living International
,
Light
,
Light Tech
and
Matix
series.
1 •
Switch plate for the
AVE Banquise
and
Noir
series.
No modification is necessary to
holder plate A
(Pic.3) for its assembly.
Pic. 3
2 •
Switch plate for
the
VIMAR Idea
and
Rondò
series.
Using cutters on the section indicated in the figure, remove a part of all four
attachments of the
thermostat’s housing
(Pic.4).
Pic. 4
3 •Placca
BTICINO
serie
Living International
,
Light
e
Matix
Using cutters on the section indicated in Pic.5, completely remove all four
attachments of the
thermostat’s housing
.
Pic. 5
HOLDER PLATE B
HOLDER PLATE B
HOLDER PLATE B
HOLDER PLATE B
HOLDER PLATE B
Pic. 6
Using this
backplate
the following domestic switch series can be mounted:
1•
VIMAR Plana
and
Eikon
series.
2•
BTICINO Luna
series.
N.B.
For the
BTICINO Luna series
switch plate use cutters to remove the
two tabs inside the switch plate.
3•
LEGRAND Vela
series.
No modification is necessary to the
backplate
for their assembly.
3.
530
.1652
TE401
White
3.
531
.1653
TE402 Anthracite grey
3.
531
.1705
TE403
Silver
U
NA C NC
3 2 1
CHIUDE
NA C NC
3 2 1
APRE
ADAPTABLE SWITCH PLATES
ADAPTABLE SWITCH PLATES
ADAPTABLE SWITCH PLATES
ADAPTABLE SWITCH PLATES
ADAPTABLE SWITCH PLATES
AVE : serie Banquise and Noir.
VIMAR: serie Idea, Idea Rondò, Plana ed Eikon.
BTICINO: serie Living international, Light, Light Tech, Matix, Luna and Axolute.
LEGRAND: serie Vela.
GEWISS: serie Chorus One, Chorus Lux, Chorus Art, Chorus Flat, Chorus
Geo,
*
Playbus and
*
Playbus young.
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
T-Touch
is a flush-mounted touch screen thermostat that facilitates setting
the temperature in your home.
T-Touch
allows the setting of two modes of temperature:
The DAY temperature ( ) and the NIGHT temperature (
).
T-Touch
has
a backlight display with constant digital visualization of the
measured temperature and the set temperature.
T-Touch
controls
the heating and air-conditioning systems.
It avoids wasting energy by activating the heating and air-conditioning systems
only when required.
Thanks to the
holder plate
the most diffused domestic series of switches
and accessories on the market can be mounted.
ELECTRICAL CONNECTION
ELECTRICAL CONNECTION
ELECTRICAL CONNECTION
ELECTRICAL CONNECTION
ELECTRICAL CONNECTION
The terminals for the electrical connections are positioned at the rear of the
thermostat’s housing
(Pic.1).
UK
C O L O R
C O L O R
C O L O R
C O L O R
C O L O R
FLUSH-MOUNTED TOUCH SCREEN THERMOSTAT
T-Touch
M a d e
M a d e
M a d e
M a d e
M a d e
i n
i n
i n
i n
i n
I t a l y
I t a l y
I t a l y
I t a l y
I t a l y
T-Touch
T-Touch
