from 1/2” to DN100
MAINTENANCE
The solenoid valve’s operation should be checked periodically. Should disassembly be necessary, make sure there is no gas under pressure
inside the valve and that is not connected to the power supply before starting. All maintenance operations should be carried out by qualified
personnel.
: a particular (230Vca) connector must be used with these
coils which acts as a “delayer” and “rectifier” included in the
packaging: Cod. 2.180.2429
COIL MARKING
N.C.
230Vac
230VRAC 17W
B
ELECTRICAL CONNECTION
NEUTRAL
EARTH
PHASE
110Vac
110VRAC 17.5W
B
B
LOSS OF HEAD DIAGRAM
NO
Overall measurements (mm)
Threaded connections: from 1/2” to 2”
as ISO 228/1. Alluminium body
Flanging connections: from DN65 to
DN100 as UNI 2229.
Alluminium body.
INSTALLATION AND POSITION
Please caerfully read all istruction before use.
A suitable Gas filter (according to UNI EN161) must be installed upstream of this device and all rules and laws in force for Gas installations must
be adhered to.
These solenoid valves will only operate with when the flow is in the same direction as the arrow on the valve body which is generally towards the
appliance and upstream of the regulation apparatus.
from 360mbar to 6bar
DIMENSIONS (mm):
C
72
72
72
164
164
164
247
247
265
B
68.0
68.0
68.0
154.5
154.5
154.5
185
200
220
A
148
148
148
240
240
253
350
350
385
φφφφφ
DN15 -1/2”
DN20 - 3/4”
DN25 - 1”
DN32 - 1”
1/4
DN40 - 1”
1/2
DN50 - 2”
DN65
DN80
DN100
Connection
Horizontal position
Vertical position
Overturned position
The manufacturer reserves the right to make any aesthetic or functional
modification to the product without prior notice at any time.
dis.8034076b cod. 2.710.2752
Made in ItalyMade in ItalyMade in ItalyMade in ItalyMade in Italy
TECHNICAL CHARACTERISTICS
- Max pressure:
360mbar-6bar
- Opening time:
< 1 sec.
- Closing time:
< 1 sec
- Max number of operations: 20 per minute
- Power supply:
230Vac/110Vac (-15%+10%) 50-60Hz
- Use:
Non Aggressive gases (Family 1-2-3) and Air
- Working temperature:
-20°C..... +60°C.
- Connections:
from 1/2” to 2” threaded as ISO 228/1
from DN65” to DN100 flanging as UNI2223
- Degree of protection:
IP65
- Group:
2
- Approval:
Directive 2014/68/UE (only for 6bar model)
Directive 2009/142/CE (GAS)-EN161
12345678
12345678
12345678
12
12
12
12
12
12
Tecnocontrol Srl
via Miglioli, n°47
20090 Segrate (MI) Italy
Tel. +39 02 26922890
www.tecnocontrol.it
GECA Srl
via E.Fermi, n°98
25064 Gussago (BS) Italy
Tel. +39 030 3730218
www.gecasrl.it
