background image

 
 

 

Gebwell 

G-Energy

 

 

Repair under warranty will be carried out free of charge.

 

Servicing in Finland 

Servicing  for  this  product  during  the  warranty  period  and  after  the 
warranty  period  in  Finland  will  be  performed  by  the  servicing 
organisation authorised  by  the  manufacturer  throughout the  economic 
service life of the accumulator. 

Making a service request 

Repairs  under  warranty,  servicing  requests  and  orders  for  spare  parts 
must  be  directed  straight  to  the  authorised  Gebwell  retailer  that 
sold/delivered the product. Before making a service request, please: 

 

carefully read the installation, operation and maintenance manual, 
and consider whether you have followed the manual when using 
the device 

 

ensure, before making the request, that the warranty period has not 
run out, you have carefully read the warranty terms and know the 
product’s model and serial numbers 

 

all parts belonging to the device to be returned must be packed with 
the device 

 

the device to be returned must be closed in such a way that handling 
it does not have adverse effects on health or the environment. 

The  device  replaced  under  warranty  is  the  manufacturer’s  property. 
Gebwell  Ltd.  reserves  the  right  to  decide  how,  where  and  who  will 
perform  the  repair  or  replacement  under  the  responsibility  of  the 
manufacturer. 

Gebwell Ltd. is not liable for the breakdown of an incorrectly installed 
device. 

 

 

 

 

Summary of Contents for G-Energy













Reviews: