Gebwell G-Energy, Installation, Operation And Maintenance Manual

Page: 12 / 12

12
Gebwell G-Energy
11 Accumulator technical specifications
G-Energy Custom Accumulator – fully customized accumulator
Volume – 501, 1000, 2000, 3000, 4000 or 5000 litres
Pressure class – 1,5-10 bar
Connections – number, size and disposition as required
Tank material – FE, HST or RST
Insulation material – urethane, cell rubber or without insulation
Bulkhead – equipped with or without bulkhead
Model
Custom 501 Custom 1000 Custom 2000 Custom 3000 Custom 4000 Custom 5000
Tank volume L 501 1000 2000 3000 4000 5000
Height mm* **
2010 / 2030 2130 / 2150 2200 / 2250 2350 / 2400 2400 / 2450 2500 / 2550
Height
low-height mm* ** 1980 / 2000
Diameter mm** 600 / 780 850 / 1030 1200 / 1380 1400 / 1580 1600 / 1780 1800 / 1980
Tilt measurement mm*** 2100 2200 2300 2450 2600 2700
Weight kg
depending on the
model
depending on the
model
depending on the
model
depending on the
model
depending on the
model
depending on the
model
Connection sizes as desired as desired as desired as desired as desired as desired
Max coil size LK45 LK55 LK110 LK110 LK110 LK110
Number of heater
connections
pc
as desired
as desired as desired as desired as desired as desired
Max size electric heater
kW 12 12 12 12 12 12
Max temperature
°C 110 110 110 110 110 110
Max operating pressure
bar 1,5-10 1,5-10 1,5-10 1,5-10 1,5-10 1,5-10
Domestic hot water coil
Model
GTIN
Max flow
l/s
Copper pipe
length
m
Heat transfer
area
m 2
Connection
DN/UK
Flange
diameter
mm
Feasibility
tank capacity
L
LK35 coil 5362300 0,5 9 2,1 20 200 501–5000
LK45 coil
5361955 0,5 12 2,8 20 200 1000–5000*
LK55 coil 5361956 1,0 2 x 6 2,8 32 200 1000–5000
LK65 coil 5362603 1,0 2 x 9 4,2 32 200 2000–5000
LK90 coil 5361957 1,0 2 x 12 5,7 32 200 2000–5000
LK110 coil
5361958 1,5 3 x 9 6,4 40 300 2000–5000