Geberit Piave, Maintenance Manual

Page: 26 / 52

26
99079193583897099 © 03-2022
971.197.00.0(00)
Replacing the connection hose of
the deck-mounted tap
The connection hose of the deck-mounted tap must
only be replaced if there are imperative reasons to
do so, for example contamination of the supply
pipes. The installation manual 967.768.00.0
describes how to replace the connection hose.
The connection hose must be replaced by a
skilled person from the responsible Geberit
sales company.
Replacing the connection hose of
the wall-mounted tap
The connection hose of the wall-mounted tap must
only be replaced if there are imperative reasons to
do so, for example contamination of the supply
pipes.
The connection hose must be replaced by a
skilled person from the responsible Geberit
sales company.
Demounting the connection hose of the
wall-mounted tap
1
Detach the cover plate. → See figure
sequence
1 , page 45.
2
Close both shut-off units or angle stop
valves. → See figure sequence
2 ,
page 47.
3
Actuate the flush to relieve the pressure.
4
Demount the control electronics.
5
Disconnect all cables.
6
Remove the power supply cable from its
bracket and demount the power supply unit,
battery compartment or rechargeable
battery.