Status LED on the lateral control panel
The status LED on the lateral control panel informs you of the current device status.
LED
Description
Flashes blue
The device initialises after switching on. A system flush is
performed.
Lights up blue
The heating element is switched on.
Does not light up
The heating element is switched off. Economy mode is active.
Flashes blue-red
The device must be descaled. → See "Descaling the device",
page 29.
Flashes red
Malfunction message → See "The shower toilet is without
function", page 33.
Flashes blue-red and
lights up orange
The device is blocked and urgently needs to be descaled. The
spray functionalities cannot be used when blocked. The block
can be reset for 1 shower cycle. To implement this, the
<Shower> button must be pressed for 5 seconds.
Lights up orange
The device is now descaling. It is not possible to use the shower
toilet for the duration of the descaling procedure.
Flashes orange
Water replacement is being carried out. → See "Automatic water
replacement", page 21.
Flashes red and orange at
the same time
The device is in descaling mode and is waiting for a command
from the user.
Special assignment of the buttons
You can access advanced functions of your shower toilet using specially assigned buttons.
Table 1: Lateral control panel
Function
Button on the lateral control panel
On
Off
Extend spray arm for cleaning
Briefly press <+> and <Shower> at
the same time.
–
–
Start descaling function
Press <−> and <Shower> at the
same time for 5 seconds.
–
–
Suppress the descaling
message for 1 more shower
cycle
Press the <Shower> button for
5 seconds.
Beep (1x) –
63050396662377483 © 03-2021
967.212.00.0(03)
13
Summary of Contents for AQUACLEAN TUMA CLASSIC
Page 1: ...GEBERIT AQUACLEAN TUMA CLASSIC USER MANUAL ...
Page 2: ......
