Replacing the remote control
battery
Prerequisite
–
During the entire procedure, the remote
control must be located in the reception
range of the shower toilet.
1
Remove the used battery. Dispose of
the used battery appropriately.
2
Insert a new CR2032 battery.
&5
Re-assigning the
remote control
The device can only be operated
with a single, assigned remote
control.
Prerequisite
–
The device is switched off.
▶
Switch the device on and press the
<+> button on the remote control for
approx. 30 seconds until [Pairing ok]
appears on the display.
T
Result
✓ The shower toilet can be controlled by
remote control.
162129590266710283 © 03-2021
968.681.00.0(04)
43
Summary of Contents for aquaclean sela
Page 1: ...GEBERIT AQUACLEAN SELA USER MANUAL...
Page 2: ......
