GeBE-TESTBENCH Linerless
GPT-4673
8.2.2 CLEANING PROCESS
The linerless components of the printer require a special
cleaning process, see chapter 8.2.2.1 LINERLESS
COMPONENTS, page 28.
1. Open the printer mechanism according to chapter
8.2.1 OPEN THE PRINTER MECHANISM, page 27.
2. Manually remove existing scraps of paper.
3. Forcefully blow into the paper tray in order to remove
the coarse dust.
In principle the printer must be kept dust-free.
8.2.2.1 LINERLESS COMPONENTS
•
print platen
•
support platen
•
cutter blade fixed (above)
•
cutter blade moveable (below)
The linerless components must NEVER be cleaned with
solvent-based liquids or alcohol, as this will attack the
coating. Even rubbing on the surface or using hard
cleaning items will damage the coating irreparably.
For cleaning start with point 1.–3. of chapter 8.2.2
CLEANING PROCESS, page 28.
4.
Adhesive residues on the linerless components
may only be "dabbed" with a label.
5.
Particularly strong contaminations can be
removed with a suitable silicone oil (e.g.: OKS
1010/2) and a cut-resistant cloth or soft cotton
buds.
6.
Support and print platen can also be removed
from the holder for cleaning and be replaced, if
necessary.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. GPT-4673-LL-Testbench-C32-E-SMAN-V1.0-0973
Feinwerktechnik GmbH
fax
+49.89.894141-33
date September 4, 2019
Beethovenstraße 15
page 28 | 34
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
print platen support platen
