GeBE-TESTBENCH Linerless
GPT-4673
Field 3:
Printout of the graphics test file "Bon-Tahoma-640x480.prn".
In Field 4:
Time (ms), the waiting time for the next field and thus the next printout is entered.
Field 5+6:
Please make sure that the motor does not overheat. We recommend that the motor temperature does not
exceed 45°C (5) (6), otherwise the heat can greatly influence the adhesive properties. An e.g. side-mounted room fan with
low speed brings significant cooling. An attachable cooler system for the GeBE Testbench Linerless is in preparation.
Field 7:
PS has 3 counters, which are also stored with storage of the project. Counters 1 and 2 count upwards indefinitely.
Counter 3 counts down to 0 and then stops the test run.
Partial detachments tests or slip tests have to be performed with the batch builder.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. GPT-4673-LL-Testbench-C32-E-SMAN-V1.0-0973
Feinwerktechnik GmbH
fax
+49.89.894141-33
date September 4, 2019
Beethovenstraße 15
page 21 | 34
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
