GeBE E + F GmbH • www.gebe.net • GeBE Doc. No.: SMAN-E-673-V1.2 • Desktop Ticket Printer GPT-4633
Safety Instructions
3
1 Safety Instructions
1.1 Symbols and their Meaning
Carefully read all safety instructions!
ATTENTION
concerns your
personal safety
and
must be
observed at all times
. It is essential to forward these
instructions to all other personnel using this device.
Caution
hot surfaces
concerns your
personal safety
and signals a
risk of
being burned
upon touch.
It is essential to forward
these instructions to all other personnel using this
device.
TIP
concerns
equipment safety
.
The adherence of all instructions, as well as the
appropriate application and use in accordance with the
op-erating instructions are binding for product liability
and product warranty. Attempts by the customer to
repair the device will make all warranty claims null and
void.
For technical questions, please contact GeBE
Technical Support.
Instructions marked with a
require consultation
with GeBE Technical Support.
Tips marked with a
will help you to utilize your
printer to its fullest.
Documents or Internet links are marked with a
,
referring to more detailed or additional information.
1.2 Device Information
TIP
•
The device may only be opened or repaired by
authorized personnel. Never open the device or car-
ry out repairs yourself. Always contact authorized
technical service personnel.
You can find all relevant data in the chapter "Service
and Maintenance".
•
Before the device is turned on, make sure that the
system voltage of your installation matches the
supply voltage of the device. The device characte-
ristics are printed on the name plate and in the
technical data.
- The name plate is located on the underside of the
device.
- For the technical data of this device, refer to the
chapter "Technical Data".
Safe operation of this device is only warranteed,
if the instructions in this operating manual have
been complied with.
For installation:
Always disconnect system power supplies.
Only use original parts and accessories.
•
Peripheral devices that are connected to the
interfaces and the DC circuits of this device have to
meet the requirements for low safety voltage in
accordance with EN/IEC 60950.
•
Switching off the device does not completely
disconnect it from the power supply. Your device is
only disconnected completely, when the power is
unplugged.
ATTENTION
•
Please make sure that the power supply cable is
routed in
such a way that it is not a trip hazzard,
and it cannot be damaged by other devices.
CAUTION
hot surfaces
•
During operation, surfaces in the surrounding area of
the print head may heat up. Therefore, direct contact
with the print head must be avoided to prevent
burning accidents. Do not put heat sensitive objects
close to this heat source.
TIP
•
Avoid constant high humidity and condensation.
Protect the device from being splashed and from
com-ing in contact with chemicals.
•
Only use spare parts and accessories supplied or
authorized by GeBE. The use of unauthorized parts
or accessories may considerably affect the function
and safety of the device. All parts included are listed
in the chapter "Packing List", while the original
accessories are listed in the chapter "Parts and
Accessories ".
•
It is no longer possible to safely operate the device,
if:
- the housing has been damaged due to mechanical
overload
- moisture reached the inside of the device
- smoke is coming from the inside of the device
- the power supply cord is damaged
- the device stopped working properly
Unplug or turn off the device immediately, when such a
failure occurs, and contact GeBE customer service.
See chapter "Service and Maintenance".
TIP
We explicitly state that all product liability and
guarantee claims are null and void, if the device has
not been used in accordance with the instructions
in this operating manual or on the device itself, or if
it has been used inappropriately.
