GeBE-MULDE Mini
GPT-4352(-60)
8.1.1 SUITABLE PAPER
Which thermal paper is suitable?
GeBE offers the suitable paper, see 4.3.2
OPTIONAL ACCESSORIES AND SPARE PARTS,
page 9.
Other paper types may cause disturbances.
For further informationen please refer to our paper
specifcation TI-DE-0606.
Further GeBE paper types:
Label paper
are connected by a perforation. Between the labels, there
is a mark for correct positioning. Only these type of labels
can be printed.
Adhesive labels may only be used with GeBE-MULDE Mini
type GPT-4352-60.
8.2
CLEANING
After lager print jobs, depending on the paper quality and
adverse environmental conditions, it may be necessary to
clean print head, platen roll and sensor.
Especially, when the print is no longer properly performed.
Never use sharp opjects for cleaning. This may damage the
print head.
CLEANING PROCESS:
1. Open the paper tray and remove the paper roll,
see chapter 8.1 INSERT PAPER, page 16.
Do not touch the print head as it may be damaged by
static electricity.
2. Loosen dirt particles at paper, sensor and tear bar
with a small brush.
3. Forcefully blow into the paper tray in order to
remove the coarse dust.
In principle the printer must be kept dust-free.
4. Soak Q-tip with isopropanol (IPA) and clean the
sensor, platen roll and print head rail, as well as
further dirt. Alternatively use a head cleaning pin
or cleaning card.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. GPT-4352-A8-E-SMAN-V1.3-0627
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
May 23, 2018
Beethovenstraße 15
page 17 | 22
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
print head rail
