GeBE-MULDE Mini
GPT-4352(-60)
7
INTERFACES
The controller GCT-439x either contains an USB full speed interface or a serial RS232 or TTL interface.
Avoid connecting cables when the power supply is switched on. If this is not possible, make sure that the USB interface is always
connected after the power supply has been plugged in.
Detailed controller information is available from the hardware descriptions
HaMAN-E-0671 (GCT-4392) and HaMAN-E-0925 (GCT-4393).
7.1
USB INTERFACE
The suitable interface cable has to be connected to the
socket (2/fgure 3) and on the other side directly to an USB
connection (COM port of a PC).
Connection J5 (GCT-4393) / J204 (GCT-4392)
Pin
Function
Dir
1
USB-Vcc
-
2
GND
-
3
USB D-
I/O
4
USB D+
I/O
5
GND
-
Socket:
Molex 53261-0571
J5 / J204
Mating connector:
Molex 51021-0500
AWG 30 - 26
The USB device class is "Printer Class". When plugged in,
the PC will report "USB printer support" and installs an
"USB00x" USB port. When installing the printer driver, it
can easily be guided onto the USB port.
USB specifcation
V1.1 (USB 2.0 compatible)
Device type
Vendor Specifc Device or Printer Class
USB
Full Speed 12 Mbit/s
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. GPT-4352-A8-E-SMAN-V1.3-0627
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
May 23, 2018
Beethovenstraße 15
page 14 | 22
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
