Program 1
Teach-in of transponder keys
Transponder
The transponder key is programmed to the desired
relay or block!
Put the desired
key to the
reader
LED flashes
1x long
Set all DIP to
OFF
Put DIP of the
desired relay or block
* (1/2/3) to ON
*Note:
Cody Universal 1/1
The keys are distributed among three blocks of 255 keys per color. The blocks correspond to the first
3 DIP switches.
Cody Universal 1/2 , Cody Universal 1/3
Here the blocks are allocated to the relay i.e. 255 keys per relay, DIP 1 = relay 1, etc.
If more than one key (of the same color only!) is taught-in, the DIP can remain in the ON position. The
successful teach-in of every key is confirmed by the illumination of the reader's LED. After the last key
has been taught-in, the DIP switch is reset to its initial position (OFF).
ATTENTION:
It is not possible to teach-in keys of different colors in one and the same block!
The reader should not be mounted directly on metal. Then use a spacer case (No. 508.000G.00).
