ATTENTION!
During the use of the machine, please be sure
that for a radius of 50 feet, there are not any persons or animals.
If somebody comes up, please stop immediately the tractor
engine.
ATTENTION!
Before use, please check that gears are
adequately greased (see lubrication section).
PULL TYPE SPREADER USE
10
RECOMMENDATIONS FOR A CORRECT DISTRIBUTION:
●
Please always test the lbs. per acre that you wish to spread before starting to work.
●
Use a fertilizer in perfect conditions, a humid fertilizer could not be spread uniformly and correctly.
●
Avoid spreading the fertilizer on windy days, in order to improve the uniformity of the distribution.
CONNECTIONS:
The pull type spreaders model PTP can be hitched to every type of tractor or ATV/quad with a 2" ball.
To make the connection, it is necessary to put the ball hitch in the coupler on the pull type spreader, locking
it pushing the lock handle towards the bottom.
Check and regulate the length of the regulation tongue rod, so that the spreader disc is, as parallel as pos-
sible, to the ground, in order to get a uniform and regular distribution of the fertilizer.
Unscrew the locking bolt, as shown with the arrow in the picture below and move the rod in the optimal
position, in correspondence of the present holes and lock the bolt in the new position..
Shaft Regulation Bar
Correct Position of the Spreading Disc
Summary of Contents for PTP180-P
Page 14: ...SPREADING CHART 12...
Page 20: ...PARTS BREAKDOWN 18...
Page 21: ...PARTS BREAKDOWN 19...