• Wrap the silicone strap
(Fig. 6)
around the
bike frame and attach it to the strap hook.
• To rotate the taillight, press on the release
latch
(Fig. 7)
and slide the taillight off.
• Rotate to desired position (Fig. 8), press on
the release latch, and slide the taillight back
on.
• There are four different lighting modes:
High, Slow Chase, Strobe, Fast Chase
• To switch through the different lighting
modes, press down on the power button to
alternate through the four modes.
• To switch through the different lighting
modes, press down on the power button to
alternate through the five modes.
• To turn the taillight on, press down on the
power button located on the front of the
taillight.
• To turn the taillight off, press down on the
power button to cycle through all the
lighting modes until the light is off.
• Wrap the silicone strap (Fig. 3) around the
handlebar (Fig. 4) and attach it to the
strap hook (Fig. 5).
• There are five different lighting modes:
High, Medium, Low, Strobe w/ Side Strobe
Lights, Medium w/ Side Strobe Lights
• To turn the headlight on, press down on
the power button located on the top of
the headlight.
• To turn the headlight off, press down on
the power button to cycle through all
the lighting modes until the light is off.
BEFORE AND DURING EACH USE, ENSURE THE RUBBER COVER IS SECURED OVER THE USB
CHARGING PORT. DO NOT USE THE LIGHTS IN HEAVY RAIN.
OPERATIONS
HEADLIGHT
TAILLIGHT
On/Off
Switching Modes
How to Mount the Headlight
How to Mount the Taillight
Switching Modes
On/Off
HIGH
MEDIUM
LOW
STROBE W/
SIDE STROBE
LIGHTS
MEDIUM W/
SIDE STROBE
LIGHTS
HIGH
SLOW CHASE
STROBE
FAST CHASE
POWER
BUTTON
POWER
BUTTON
FIG. 6
FIG. 7
FIG. 8
FIG. 3
FIG. 4
FIG. 5
Lift the rubber cover to locate the USB charging port.
Note: To charge the taillight, press down on the release latch to
slide the taillight out. It is unnecessary to unmount the
taillight to charge.
Connect the light to the USB charging cable
(Fig. 1 & Fig. 2).
Connect the charging cable to a powered USB port,
such as a phone charger, power bank, or computer.
Unplug the USB charging cable when the LED indicator turns green or after 3 hours of
charging. Note: The battery may be fully charged even if the indicator does not turn green.
Blinking Red Power Button =
CHARGING
Solid Green Power Button =
FULLY CHARGED
Solid Red LED Indicator =
CHARGING
Solid Green LED Indicator =
FULLY CHARGED
STRAP
HOOK
POWER
BUTTON
SILICONE
STRAP
RELEASE
LATCH
SILICONE
STRAP
STRAP
HOOK
USB CHARGING
PORT
USB CHARGING
PORT
POWER BUTTON
HEADLIGHT CHARGING
TAILLIGHT CHARGING
•
The bike lights contains lithium batteries that can present a fire,
explosion, and burn
hazard.
•
Do not repair, disassemble, or modify the bike lights.
•
Do not charge or store the bike lights near flammable materials.
•
Do not charge with a wet or damaged USB charging cable.
•
Do not overcharge the bike lights; unplug the bike lights once fully charged or if left unattended.
•
Use only UL-Listed charging adapters rated at 5V 2.4A max.
•
Do not use or charge the bike lights if they are wet or damaged.
•
Do not use the bike lights while they are charging. Unplug the bike lights before use.
•
Keep the lights away from fire, water, and high temperatures.
•
Failure to follow safety instructions may result in fire, personal injury, and damage to property.
WARNING
GETTING STARTED
Charging the Bike Light Set
Fully charged in approximately 3 hours.
Fully charged in approximately 2 hours.
Blinking LED Indicator =
LOW BATTERY WARNING:
During use, the bike lights
will BLINK RED to indicate LOW BATTERY.
THE BIKE LIGHTS WILL TURN OFF WITHIN MINUTES.
Charge before use.
!
LOW BATTERY WARNING
FIG. 1
FIG. 2
SIDE
STROBE
LIGHTS
1
2
3
4
