5
C
ART TO
T
OWING
C
ONFIGURATION
T
OWING
U
SAGE
If the Gearboss TranSPORT cart is being pulled by a tow vehicle (Gator™, lawn tractor, golf cart), make
sure to secure the load and pull the cart at a safe speed.
To convert the cart to the Towing configuration, do the following:
1.
Pull out on the Handle to release the lock position.
2.
Remove the Carriage Bolt and Wing Nut from the
handle.
3.
Rotate the Handle downward.
4.
Replace the Carriage Bolt and Wing Nut.
The TranSPORT Cart is now ready to be attached to the
towing vehicle.
NOTE:
End Braces are shown folded down for clarity.
Pulling a heavy load at high
speed can cause an crash that
may result in severe injury or
extensive damage to the cart.
!
CAUTION
Never exceed 10 miles per hour.
Trying to stop a heavy load may
cause a crash. Severe injury or
damage to the cart may result.
!
CAUTION
Never exceed 5 miles per hour
(a fast walk) if the load is more
than 500 lbs or if the ground is
rough. A runaway or overturned
cart may result in severe injury
or damage to the cart.
!
CAUTION
Pull the cart slowly if the load
is piled high, if turns are tight,
or if the route includes ramps
or inclines. An overturned cart
may result in severe injury or
damage to cart and load.
!
CAUTION
Never reverse a tow
vehicle with the cart
connected. Backing a cart
into position can easily
result in a “jack-knife” and
damage to the pull handle
or tow vehicle.
!
CAUTION
Carriage
Bolt
Wing
Nut
Carriage
Bolt
Wing
Nut
