Step 3
The uncovered wire from the Neck Pickup (5) should be soldered on to the back of
the first Volume Pot (The pot without the transistor), and the covered wire should be
soldered to the middle arm on the Pot. This should be repeated with the Bridge
Pickup (6) and the second volume pot. The Tone Selector (4) should then be placed
through the first hole in the Body (1). The first Volume Pot should be placed through
the second hole, and the first Tone Pot through the holes below. This should be
repeated with the second set, and then the Jack Input should be fed through the
final hole (as pictured).
Step 4
