2
User Manual | AlarmDock Halo 2 | GEAR4
■
When in Standby, Press the SNOOZE
button to adjust the LCD screen brightness.
There are 5 brightness levels.
■
The LCD can also be changed using
the button on the remote control.
For use with ipod /
iphone:
■
Carefully insert your iPod / iPhone into the
dock.
N.B. When connecting your iPhone or iPod touch
to AlarmDock Halo 2 for the first time, your device
will display a notification that the accessory
requires an application that is not installed. Tap
OK to go to the SmartLink App download page.
Tap the Install button to begin your download.
The GEAR4 SmartLink application is free of
charge.
■
Press the MODE button to select iPod mode.
■
Press play on your iPod / iPhone and control
the music using your device or use the
remote control to navigate the iPod / iPhone
menus.
For use with FM radio:
■
Press the MODE button to select FM mode.
■
Press or to scan to the frequency desired.
■
Press and hold or to scan automatically
to the next clear frequency.
■
To select a preset radio station, press and
scroll between presets.
To sAve A preseT Frequency:
■
You can save up to 9 FM presets.
■
Adjust the radio to your desired frequency
then press and hold the button until the
display flashes. Input the desired memory
position by pressing the / buttons.
Press the button again to save.
To set the clock:
■
Turn off any active alarms (so no alarm
icons are displayed).
■
Press the SET button.
■
‘12h’ will begin flashing. Press / buttons
to select either 24 hour or 12 hour. Press the
SET button to save.
■
The hour display will start flashing.
Press / adjust the hour. Press the
SET button to save.
■
The minute display will start flashing. Press
/ to adjust the minutes. Press the SET
button to save.
■
One of the days of the week will start
flashing. Press / to select the day
of the week. Press the SET button to save.
GEAR4_PG548_MANUAL_INNER_V1.1.indd 2
05/08/2011 13:29
Downloaded from www.vandenborre.be
