22
Installation Instructions
Remove 2 screws on top of oven, just above
the grille panel, using a Phillips screwdriver.
Open the door.
Remove the grille.
Insert the filter into the oven as shown until it fits
squarely into place. It will rest at an angle behind
the front lower tabs. When properly installed,
the wire mesh of the filter should be visible
from the front.
4
2
1
INSTALLING THE CHARCOAL
FILTER
C5
MOUNT THE OVEN
(continued)
C4
Screws
6
5
Tighten the outer two screws to the top of the
oven. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
Insert 3 self-aligning screws
(
1
ø
4
s
[ȓµWKURXJKRXWHU
top cabinet holes. Turn two full
turns on each screw.
Install grease filters. See the Owner’s Manual
packed with the oven.
4
Replace the grille and the 2 top screws.
Close the door and replace left side screw.
5
6
3
Grille
Front lower tabs
Charcoal filter
Charcoal filter installed
Insert a self-aligning screw through top-center
cabinet hole. Temporarily secure the oven by
turning the screw at least
two full turns
after
the threads have engaged
.
(It will be completely
tightened later.)
3
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Oven Top
Equivalent
to depth
of cabinet
recess
Self-Aligning Screw
This distance
can NOT
exceed 2” to
ensure proper
installation