About the automatic ice maker.
GEAppliances.com
A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic Ice Maker
*
The ice maker will produce seven cubes
per cycle approximately 100130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other use
conditions.
The ice maker will fill with water when it cools to
15°F (10°C). A newly installed refrigerator may
take 12 to 24 hours to begin making ice cubes.
If the refrigerator is operated before the water
line connection is made to the unit or if the
water supply to an operating refrigerator is
turned off, make sure that the ice maker is
turned off. Once the water has been connected
to the refrigerator, the ice maker may be turned
on. See the table below for details.
You may hear a buzzing sound each time
the ice maker fills with water.
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
When the bin fills to the level of the feeler arm,
the ice maker will stop producing ice. It is normal
for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NOTE:
In homes with lower-than-average water
pressure, you may hear the ice maker cycle
multiple times when making one batch of ice.
Feeler Arm
Ice maker
Display Type (See Page 7)
Model #
How to turn the ice maker on/off
Control Style A
PFE28P, PYE22P
Use the ICE button on the control. See
Controls
, pages 9 & 10.
Control Style B, C
PFH28,PFE28K,DFE28,
GFE28,GFE26,PYE22K,
DYE22K,GYE22
Use the ICE MAKER button on the control. See
Controls
, pages 9 & 10.
Control Style D
GNE29, PWE23
Use the ICE MAKER button on the control. See
Controls
, pages 9 & 10.
How to Turn the Ice Maker On/Off
To minimize the risk of personal injury, avoid contact with the moving parts of the ejector mechanism, or with the
heating element that releases the cubes. Do not place fingers or hands on the automatic ice making mechanism while
the refrigerator is plugged in.
*Select Models Only
Lift and pull
Ice Box
Door
Ice Bucket and Dispenser*
Open the ice box door on inside of the left
door.
Pull up and out on on the ice bucket in
the left hand door to remove it from the
compartment .
To replace the ice bucket, set it on the
guide brackets and push until the ice
bucket seats properly.
If bucket cannot be replaced, rotate the ice
bucket fork 1/4 turn clockwise.
Ice Maker (Available on Non Dispense
models, also available as IM Kit for
some models)
There is additional ice storage in the freezer
compartment drawer.
Open the freezer drawer.
The ice bucket is located on the left side of
the upper basket.
Pull the upper basket forward to remove
the ice bucket.
Freezer
Ice
Bucket
107
