GEAppliances J2B900 Owner'S Manual & Installation Instructions Download | Manualshive

Page: 30 / 61

background image

29

Consumer Support

Installation Instructions

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

The oven door must be closed and all controls set correctly for the cycle to work properly.

Before a Clean Cycle

For the first self-clean cycle, we recommend
venting your kitchen with an open window
or using a ventilation fan or hood.

Remove the shelves, broiler pan,
broiler grid, probe, all cookware and
any aluminum foil from the oven.

The oven shelves can be self-cleaned,
but they will darken, lose their luster
and become hard to slide.

Soil on the front frame of the range and
outside the gasket on the door will need
to be cleaned by hand. Clean these areas
with hot water, soap-filled steel-wool
pads or cleansers such as Soft Scrub

®

.

Rinse well with clean water and dry.

Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for the
gasket to remain intact. If you notice it
becoming worn or frayed, replace it.

Wipe up any heavy spillovers on the oven
bottom.

Make sure the oven light bulb cover is
in place and the oven light is off.

IMPORTANT:

The health of some birds is

extremely sensitive to the fumes given off
during the self-cleaning cycle of any range.
Move birds to another well-ventilated room.

How to Set the Oven for Cleaning

Touch the

SELF CLEAN

pad.

Using the number pads, enter the
desired clean time, if a time other
than 4 hours is needed.

Clean cycle time is normally 4 hours.
You can change the clean time to any time
between 3 hours and 5 hours, depending
on how dirty your oven is.

Touch the

START

pad.

The door locks automatically. The display
will show the clean time remaining. It will
not be possible to open the oven door
until the temperature drops below the
lock temperature and the

LOCKED DOOR

light goes off.

When the

LOCKED DOOR

light is off, open

the door.

The oven shuts off automatically when the
clean cycle is complete.

■

The words

LOCK DOOR

will flash and

the oven control will signal if you set
the clean cycle and forget to close the
oven door.

■

To stop a clean cycle, touch the

CLEAR/OFF

pad. When the

LOCKED DOOR

light goes off indicating the oven has
cooled below the locking temperature,
open the door.

■

Do not use the warming drawer during
a self-clean cycle.

Using the self-cleaning oven.

www.GEAppliances.com

Wipe up heavy soil on the oven
bottom.

«
...
28
29
30
31
32
...
»

Summary of Contents for J2B900






























































Reviews:

No comments

Related manuals for J2B900

Brand: Falcon Pages: 27

Brand: GE Pages: 64

Brand: Pacific Pages: 17

The BigOven ACF4255A

Brand: Amana Pages: 32

Brand: Hotpoint Pages: 44

Brand: hestan Pages: 40

Brand: KitchenAid Pages: 26

Brand: KitchenAid Pages: 43

Brand: KitchenAid Pages: 52

Brand: KitchenAid Pages: 21

PB969SPSS - Profile 30 in. Double Oven Ran

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: GE Pages: 2

PB910DPBB - Profile 30 in. Electric Ran

Brand: GE Pages: 2

PB900DPBB - Profile 30 in. Electric Ran

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: GE Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands