11
Troubleshooting tips
…
Save time and money! Review the chart below first and you may not need to call for service.
Problem
Possible Causes
What To Do
Water on floor
No condensate hose.
•
Make sure pump hose is connected if Internal Pump On
is selected.
Loose condensate hose
•
Make sure the condensate hose connection is tight
connection or cracked
(cannot be pulled loose) and that nothing is blocking
condensate hose
.
the
condensate
hose.
Bucket may not be fully
•
Remove and reinstall bucket, making sure the bucket is fully
seated.
inserted.
Bucket Full LED light
Pump not operating properly
• The dehumidifier will revert to bucket condensate collection
flashing and E0 displayed
if the pump is not working properly. Check to make sure the
after pump mode selected
condensate hose is not blocked, kinked or crimped.
Clogged bucket filter
• Check bucket filter as shown in
Care and Cleaning of the
Dehumidifier
to make sure it is not clogged.
Water left in the bucket
This is normal
• It is normal to have water left in the bucket even after pump
when in pump mode
operation. Make sure to empty the bucket before long-term storage.
Summary of Contents for APEL70
Page 13: ...Notes GEAppliances com 13 ...
Page 25: ...Nota 25 ...