Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
03C100-4C0
GEA Niro Soavi
55
3.5 Safety equipment used
The machine is equipped with safety equipment which prevents critical conditions arising which may
result in unexpected mechanical failures which endanger the users.
Intrinsic safety is provided by the design of the machine which is rated with a large safety margin, in
consideration of the high pressures which may result from incorrect operation by the users or faults
on the line of which the machine is part.
The main safety devices present on the machine, described below, are a safety valve on the
compression head, electrical protection equipment on the main motor and an emergency stop button.
WARNING:
If the machine is equipped with a disconnectable electrical enclosure, the lockable switch is
located on the front door.
If the machine is supplied without an electrical enclosure, the user must provide a lockable
safety switch on the power supply line.
3.5.1 Pressure relief valve
The pressure relief valve
(1)
has been designed by
GEA Niro Soavi
to protect the machine from the
possibility of overpressure which might be produced inside the compression head as a consequence
of the pumping action of the machine.
CAUTION:
The safety valve is intended to protect the machine; only a line safety valve will protect the
pipes down line of the machine itself.
CAUTION:
The valve protects only the high pressure areas on which it is installed.
Summary of Contents for Niro Soavi One7TS
Page 2: ......
