Fig.20:
Removing the valve lid
4.
Remove the housing seal without a tool.
!
Do not damage the sealing surfaces on the housing and internal
assembly.
Fig.21:
Removing housing seal
®
The internal assembly has been disassembled.
10.7.2 Assembling the Internal Assembly
Carry out the following steps:
1.
Install the internal assembly in the reverse order of disassembly, see
Section 10.7.1, Page 36.
®
The internal assembly has been assembled.
Hint!
Seals in the product-contacting area are generally not lubricated. To
facilitate assembly (better gliding properties and securing against
turning), this type of elastomer seal may, however, be wetted using a
food-grade lubricant.
! Wetting elastomer seals is not permitted when they are used in ATEX
applications!
Maintenance
Disassembling and Assembling the Internal Assembly
430BAL013317EN_1
38
11.03.2019
Summary of Contents for Aseptomag AMV
Page 60: ......
