! Do not damage the sealing surface on the valve body.
Fig.18:
Removing actuator and internal assembly
®
Internal assembly and actuator are now separated from the housing.
10.6.2 Assembling the Valve
Tools required:
•
Hex socket key
Carry out the following steps:
1.
Install the valve in the reverse order of disassembly, see Section 10.6.1,
Page 34.
!
Note “Torques for clamps” table, see Section 10.6.3, Page 36
2.
Test the function of the valve after assembling.
!
Every possible position must be activated and held for 3-5 seconds to
assure proper assembly and sealing.
®
The valve has been assembled.
10.6.3 Torques for clamp
Clamp screw thread size
Recommended torque [Nm]
M6
10
10.7
Disassembling and Assembling the Internal Assembly
10.7.1 Disassembling the Internal Assembly
Maintenance
Disassembling and Assembling the Internal Assembly
430BAL013317EN_1
36
11.03.2019
Summary of Contents for Aseptomag AMV
Page 60: ......
