19
D
GB
F
I
Tr
Ru
09705-01.2018-DGbFIT
rRu
FK30 / ...
235 N
235 TK
275 N
275 TK
325 N
325 TK
235 K
275 K
325 K
Designation
Ref. No.
Ref. No.
Ref. No.
Ref. No.
Set of gaskets
80232
80126
Valve plate kit
80240
80242
80241
80010
Set of shaft seals
80123
Oil collector ring
80127
Oil SP 46, 1 Ltr.
02279
Oil SE 55, 1 Ltr.
02282
The valve is maintenance free.
However, constant leakage can occur after blowing off due to abnormal operating conditions. This
leads to reduced performance and increases the compressed gas temperature. In this case check the
valve and replace as necessary.
6.5 Integrated decompression valve (only FK30/275 + 325)
Only use genuine GEA spare parts!
6.4 Recommended spare parts
6.7 Decommissioning
Close the shut-off valve on the compressor. Drain the refrigerant (it must not be discharged directly
into the environment) and dispose of it according to the regulations. When the compressor is depres
-
surised, undo the fastening screws of the shut-off valves. Remove the compressor using an appropri-
ate hoist. Dispose of the oil inside in accordance with the valid national regulations.
6
|
Maintenance
6.6 Extract from the lubricants table
The oil type charged as standard in the factory is marked on the
name plate
.
This oil type should be
used as a preference.
Alternatives are stated in the extract from our lubricants table below.
Refrigerant
GEA standard oil grade
Recommended alternatives
HFC
(e.g. R134a, R407,
R 404A)
Fuchs Reniso Triton SE 55
(see also chap. 6.3)
Fuchs SEZ 32/68/80
Esso/Mobil EAL Arctic 46
HCFC
(e.g. R22)
Fuchs Reniso SP 46
(see also chap. 6.3)
BP Energol LPT 46
Sunoco Suniso 3.5GS
Texaco Capella WF 46
