ADDITIONAL MATERIALS YOU WILL
NEED
• Clean Release Masking Tape – 2” width (min)
Built-In Wall Oven Flush Inset Installation Instructions
30”
27”
Single Oven
Double Oven
Single Oven
Double Oven
ZET1P
ZET1S
ZET9050
ZET2P
ZET2S
ZET9550
ZEK7000
ZEK7500
Cutout
A
Minimum cutout width with 1/8” side reveals
30
30
27
27
B
Minimum cutout height with 1/8” top reveal, 1/4” bottom reveal
29
53-3/8
29-3/16
51-1/2
C
Minimum cutout depth
24-13/16
24-13/16
24-13/16
24-13/16
Cleats
D
Bottom cleat thickness – extends full depth of cabinet
11/16
1/2
11/16
11/16
E
Side cleat thickness
3/4
3/4
1
1
F
Top cleat thickness
1-1/16
1-1/16
7/8
1-1/8
G
Setback – all cleats
1-5/16
1-5/16
1-5/16
1-5/16
H
Depth - side and top cleats
2-1/2
2-1/2
2-1/2
2-1/2
Electrical
Junction Box
J
Vertical from upper right corner
5-1/4
5-1/4
5-1/4
5-1/4
K
Horizontal from upper right corner
9-1/2
9-1/2
9-1/2
9-1/2
Please use this information along with the normal installation instructions to achieve the
flush inset
installation
of your appliance.
PREPARATION
1. Measure your cabinet to ensure all dimensions
match the specific flush inset requirements for your
model (see chart).
2. Apply Clean Release Masking Tape to all cabinet
faces for protection while installing the unit. For
each edge of the cabinet opening, start tape 1/2”
in from cabinet face and wrap around front face
to protect edges. Ensure tape extends around the
entire opening - top, bottom, and both sides.
INSTALLATION
1. Follow main instructions for product installation.
2. Remove Clean Release Masking Tape before
driving the mounting screws and trapping it in place.
3. Complete remaining steps of installation.
31-11087-1 05-17 GEA
ELEC.
C
G
A
F
E
B
D
K
J
H
Top
Cleat
Side
Cleat
Bottom
Cleat
Side View
Front View
Allow 1/8” clearances from side edges of oven door.
Top View
All dimensions shown are in inches.