9
The WASH PROGRESS lights
show what stage the washer is in. As
each stage is completed a light goes
out, so you can tell at a glance
where the washer is in the cycle.
To shorten the wash time, to rinse
and spin or to spin dry:
1
Select a wash cycle.
2
Press ADVANCE until only the
lights for the wash stages you
want remain on. Each green light
in the wash stages represents 3
minutes of agitation.
3
Press START/PAUSE.
Advancing the Wash
Cycle
ADVANCE
Rinse
Spin
POWER
START/
PAUSE
DELAY
START
WATER
LEVEL
SPIN
SPEED
Auto
High
Med
Low
Fast
Med
Slow
Hold
H
H
G
I
W
O
L
D
E
M
HIGH
MED/HIGH
MEDIUM
MED/LOW
LOW
Water Levels
Auto Water Level
Your washer can automatically
select the appropriate water level
for the load.
1
Place your clothes in the
machine.
2
Select a wash cycle.
3
Select Auto from the WATER
LEVEL options if not already
selected.
4
Press START/PAUSE.
During fill the machine will pause
occasionally to sense the water level.
The machine will check if the water
level is correct by using a series of
two different agitate strokes. If it
detects that the water level is not
enough it will fill the machine with
more water and recheck the level.
The Auto WATER LEVEL can be
adjusted. See the Auto Water Fill
Level section.
Manual Water Level
You can also manually select the
water level for the load.
The agitator has five levels marked
on its base that can be used to help
you select the correct water level.
Select the correct water level by
using the mark nearest to the top
of the clothes in the washer.
NOTE:
•
The levels marked on the agitator
are a guide for the clothes and do
not correspond to the water level.
•
Your washer may occasionally add
water during agitation. This is to
maintain the water level due to the
release of air trapped in the garments.
