GE WZSE5310T Owner'S Manual Download Page 26

Page: 26 / 36

Your washer can diagnose its own problems. If the washer gives a short burst of
beeps every 5 seconds it is telling you that it has a problem which you can correct.

NOTE:

A short burst of beeps will also be heard when the washer is plugged in.

If the washer gives a
short burst of beeps and…

Possible Causes and What to Do

Hot water temperature light

•

The hot water faucet has not been turned

is flashing

on. (If the Cold water wash setting has been
adjusted in the Option Adjustment Mode
the hot water faucet must be turned on.)

•

Hot water supply is not hot enough to main-
tain the wash temperature you have selected.
Select a lower wash temperature.

•

Inlet hoses are improperly connected. Make
sure they are connected to the correct faucets.

Cold water temperature light

•

Cold water faucet has not been turned on.

is flashing

•

Inlet hoses are improperly connected.
Make sure they are connected to the
correct faucets.

Cold and Hot water

•

Faucets have not been turned on.

temperature lights are flashing

•

Inlet hoses are improperly connected. Make
sure they are connected to the correct faucets.

High water light is flashing

•

The machine is overloaded and cannot
agitate. Remove clothes until the remaining
clothes can move freely.

Water Saver light is flashing

•

The washer has a suds build up. Too much
detergent has been used for the amount of
soil in the load or the household water is
very soft.

Beeps

If Something Goes Wrong

Before you call for service

Summary of Contents for WZSE5310T





































Search results

Summary of Contents for WZSE5310T

Reviews:

Related manuals for WZSE5310T

Brands by name

Popular brands

GE WZSE5310T, Owner'S Manual

Search results

Summary of Contents for WZSE5310T

Reviews:

Related manuals for WZSE5310T

Brands by name

Popular brands