manualshive.com logo in svg

GE WW3000S, Use And Care Manual, Page: 17 / 20

Share
Download
GE WW3000S Use And Care Manual Download Page 17

●

PROBLEM

POSSIBLE CAUSE

WATER LEAKS

 Make sure 

 connections are tight at faucets.

● 

Make sure end   

 hose is correctly inserted in and secured to drain facility.

WASHER IS NOISY

 Make sure washer is level and firm to the floor with rubber foot pads   place and

 jam nuts tight. See your Installation Instructions.

● 

A sharp, distinctive sound will be heard at the end of each 

 period as the motor

stops and the spin brake 

 the transmission “locks in. ” This sound is normal.

● 

 unbalanced loads cart cause the washer to vibrate excessively during spin,

and may cause it to move from its original position. In extreme cases (usually occurs

 washing a single, 

 item or a small load when water level is set higher 

necessary), the spin basket may strike the outer tub, creating aloud but harmless noise.
To correct, stop the 

 by pushing   the Cycle Selector knob, open the 

 and

redistribute the load evenly about the wash basket. Close the lid and restart.

WASHER PAUSES

 Washer normally pauses between washing 

 such as between wash and spin or

IN CYCLE

between spin and rinse.

If you need more 

 toll free: GE Answer Center” / 800.626.2000 / consumer information service

 

 

USER MAINTENANCE INSTRUCTIONS

The 

 The porcelain is self-cleaning. Leave lid

To Store Washer. Ask service technician to remove

open after washing to allow moisture to evaporate.

water from drain pump and hoses to prevent freezing.

Do not use harsh or gritty cleansers.

Do not store the washer where it will be exposed

The Exterior.  Wipe off any spills of washing

to the weather.

compounds. Wipe or dust with damp cloth. Try

For Long Vacations.  Be sure water supply is shut off

not to hit surface with sharp objects.

at faucets and drain all water from hoses if weather
will be below freezing.

How to remove the agitator

To remove the agitator,  snap the cap off and
remove the screw. Then remove the agitator

—   C a p

extender (on models so equipped) and the agitator.

Agitator

To replace the agitator,  carefully lower it

Extender

straight down onto the shaft so that it fits snugly

A

(on some models)

into place. Replace the agitator extender (on
models so equipped), the screw and the cap.

‘1 

— Agitator

,.

—   S h a f t

(Appearance may vary)

17

Summary of Contents for WW3000S





















Reviews:

No comments