3)
Connect the other end of the Cable to the Software Update Module. The software
transfer will begin automatically once the module is connected to the appliance. When the
software update starts, your refrigerator will shut down.
e li
s n e ispense
ispla an e in e i li
s ill
ile e s
a e n e e i e a
is ein
p a e
The Software Update Module has a green LED light and an orange LED light (see picture).
When the cable is connected, the orange light will be on solid and the green light will be
blinking as the software is being uploaded into the appliance. This software transfer may
take up to 15 minutes.
n npl e s
a e
le n il e s
a e p a e is
c
ple e
The software update is complete when the green light stops blinking and turns solid
(both the green and orange light should now be solid). You can now disconnect the
software update module from the appliance.
e li
s n e e i e a
ill c
e ac
n
en e s
a e p a e is c
ple e
Troubleshooting
–
If both the green and orange lights are blinking, the software update
for
your appliance was not successful. The lights will blink rapidly followed by a 5 second
pause. Please count the number of times the lights blink between pauses and call
se ice
Please return the Software Update Module to GE in the
pre-addressed, stamped envelope.
Orange LED
Green LED
LED’s on Module
