GE Wireless Color Camera User Manual Download Page 18

18

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception,  which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following
measures: 
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.

 is a trademark of General Electric Company 

and is used under license to Jasco Products Company LLC, 
10 E. Memorial Road, Oklahoma City, OK 73114 
www.jascoproducts.com

WARNING

Risk of fire and shock

• Only use the supplied cUL listed AC to DC adapter.
• The supplied adapter is for indoor use only.
• Do not run the camera cable inside walls; when securing the 

cable, do not cut or puncture

• Do not use in wet locations

Summary of Contents for Wireless Color Camera



















Reviews: