background image

17

Mini. Illumination: .............................................. 0 lux at 3 ft, 0.5 lux at 10ft
Voltage................................................................................................................. 9VDC
Current Consumption: .....................................................150mA maximum
Modulation: .............................................................................................................FM
Channel Selection: ....................................................................................Manual
Overall size: .......................................................2.36”(W) x 2.76”(H) x 3.07”(D)

PORTABLE LCD MONITOR

Frequency Range: .........................................................................902~928MHz 
Voltage................................................................................................................. 9VDC
Current Consumption: .....................................................475mA maximum
Channel selection: ............................................Electronic tuning with PLL
Battery ..................................................................................................... Li-Polymer
Lithium Polymer Battery (Monitor): ...................Standby time: ~5 hrs., 
continuous > 3 hrs. 

GENERAL

Operating temperature: .......................... 14°F to 104°F (-10°C to 40°C)
Humidity: .......................................................................................Less than  85%

WARRANTY

ONE-YEAR LIMITED WARRANTY: Jasco Products Company warrants this 
product to be free from manufacturing defects for a period of one year 
from the original date of consumer purchase. This warranty is limited 
to the repair or replacement of this product only and does not extend 
to consequential or incidental damage to other products that may be 
used with this unit. This warranty is in lieu of all other warranties express 
or implied. Some states do not allow limitations on how long an implied 
warranty lasts or permit the exclusion or limitation of incidental or 
consequential damages, so the above limitations may not apply to you. 
This warranty gives you specifi c rights, and you may also have other 
rights which vary from state to state. If unit should prove defective within 
the warranty period, return prepaid with dated proof of purchase to: 
Jasco Products Company
10 E. Memorial Road, Oklahoma City, OK  73114

Summary of Contents for Wireless Color Camera



















Reviews: