3
Installation Instructions
SIDE VENTING (cont.)
For LEFT venting:
• Locate the 15-1/2” exhaust duct from this kit.
• Insert exhaust duct through knockout opening on
the
LEFT
side of dryer.
• Assemble exhaust duct to elbow duct.
• Wrap the joint with duct tape to avoid air leaks.
For RIGHT venting:
• Locate the 9-1/2” exhaust duct from this kit.
• Insert exhaust duct through knockout opening on
the
RIGHT
side of dryer.
• Assemble exhaust duct to elbow duct.
• Wrap the joint with duct tape to avoid air leaks.
Right
Venting
Left
Venting
• Install the new access panel from this kit.
• Secure access panel with 4 screws saved from
earlier.
NEVER LEAVE THE BACK OPENING WITHOUT
THE ACCESS PANEL.
BOTTOM VENTING
Dryer Exhaust to the bottom of cabinet for Gas
and Electric models WITHOUT Built-In Pedestal™.
Disconnect dryer from electrical supply.
Wear gloves and arm guards.
Close the back opening with the access
panel included in this kit.
Failure to do so may result in fire, electrical
shock or lacerations.
- Fire Hazard
WARNING
• Remove the 4 screws that secure the access panel
and save. Remove the access panel.
Remove
4 screws
and save
Access Panel
• Remove the screw that secures the dryer exhaust
duct and save. Pull the exhaust duct out of the dryer.
Remove screw and save
Exhaust Duct
• Detach and remove the bottom knockout.
Botom Knockout
