Co
ns
um
er
S
up
po
rt
Tr
ou
ble
sh
oo
tin
g T
ip
s
O
pe
ra
tin
g I
ns
tru
cti
on
s
Sa
fe
ty
In
str
uc
tio
ns
In
sta
lla
tio
n
In
str
uc
tio
ns
GEAppliances.com
Signal
When the light is “on,” the washer will
beep at the end of the cycle and every
time you press a button on the control
panel.
To turn the signal off, press the
SIGNAL
button and the light will go off.
Extra Rinse
Use an extra rinse when additional
rinsing is desired to remove excess dirt
and detergent from soiled loads.
Delay Start
Use to delay the start of your washer.
1.
Choose your wash cycle and any
options.
2.
Press
DELAY START
button. You can
change the delay time in 1-hour
increments (up to 18 hours) each time
you press the
DELAY START
button.
Stop pressing the button when your
desired time is displayed.
3.
Press the
START/PAUSE
button to start
the countdown.
The countdown time will be shown in the
ESTIMATED TIME REMAINING
display.
NOTES:
n
If the door is opened while the washer
is in
DELAY
, the countdown time will
continue to count down the delay
time. If the door is not closed and the
countdown time expires, the cycle will
not start until the door is closed and
the
START/PAUSE
button is pressed.
n
You can delay the start of a washer
cycle up to 18 hours.
The light on the button will light up when
DELAY START
is on.
Lock
You can lock the controls to prevent
any selections from being made. Or you
can lock or unlock the controls after
you have started a cycle.
Children cannot accidentally start
the washer by touching pads with
this option selected.
To lock the washer, press and hold
the
TEMP
and
SPIN
buttons together
for 3 seconds.
To unlock the washer controls, press
and hold the
TEMP
and
SPIN
buttons
together for 3 seconds. A sound is
made to indicate the lock/unlock
status.
The control lock icon on the display will
light up when it is on.
NOTE:
The
POWER
button can still be
used when the machine is locked.
My Cycle
To save a favorite cycle, set the desired
settings for wash cycle, soil level, spin
speed and wash temp settings and
hold down the
MY CYCLE
button for
3 seconds. A beep will sound to indicate
the cycle has been saved.
To use your custom cycle, press
the
MY CYCLE
button before washing
a load.
To change the saved cycle, set
the desired settings and hold down
the
MY CYCLE
button for 3 seconds.
NOTE:
When using
MY CYCLE
,
wash options cannot be modified
after the cycle has been started.
NOTE:
If you change wash options
with
MY CYCLE
before starting the cycle,
the
MY CYCLE
light will turn off and you
will be returned to the base cycle.
7
8
9
10
11
7
49-90369-2_ENv01:49-90340 ENv05 8/2/2011 7:37 PM Page 7
