manualshive.com logo in svg

GE Voluson E Series, Service Manual, Page: 72 / 356

Share
Download
GE Voluson E Series Service Manual Download Page 72

3.5.8 Connecting the Wireless Network Adapter

1.

Turn ON the power of the system and wait till the system has booted.

2.

Plug the Wireless Network adapter into an accessible USB port of the Voluson E-Series. All software

drivers are pre-installed for the designated Wireless Network adapter only.

The Wireless Network Adapter can be connected to any accessible USB port.

Figure 3-21  Connection Scheme - Wireless (USB) Network Adapter

Note

Connection is always the same (no differences between PC-Motherboard version of the Voluson E-Series

system).

Note

After physical connection of the WLAN adapter to the Voluson E-Series system, follow the procedure

described in 

Section 3.13.2 "Wireless Network Configuration" on page 3-59 

.

Setup Instructions

3-28

Voluson E-Series Service Manual

5539550APB Revision 6

Summary of Contents for Voluson E Series





































































































































































































































































































































































Reviews:

No comments