GE Voluson E Series, Service Manual, Page: 26 / 356

LABEL/SYMBOL PURPOSE/MEANING LOCATION
Waste Electrical and Electronic Equipment (WEEE) Disposal. This
symbol indicates that waste electrical and electronic equipment
must not be disposed as unsorted municipal waste and must be
collected separately. Please contact an authorized representative
of the manufacturer for information concerning the
decommissioning of your equipment.
Identification and Rating Plate
(rear side of the system / on plug of each probe)
This product consists of devices that may contain mercury, which
must be recycled or disposed of in accordance with local, state, or
country laws. (Within this system, the backlight lamps in the
monitor and the Touch Panel display, contain mercury.)
Identification and Rating Plate
(rear side of the system)
not visible:
- below the cover on read side of Monitor
- on rear side of the Touch Panel
GOST-R label (Russia Regulatory Country Clearance)
Identification and Rating Plate
(rear side of the system)
"CAUTION - Consult accompanying documents” This symbol is
used to advise the reader to consult accompanying documents for
important safety-related information such as warnings and pre-
cautions that cannot be presented on the device itself.
various
"CAUTION - Dangerous electric voltage" (lightning flash with
arrowhead) is used to indicate electric shock hazards. Unplug the
main plug before opening the system!
various
"Mains OFF" Indicates the power off position of the mains power
switch.
rear of system at mains switch
(on power supply RSP)
"On/Off” or “Standby"
CAUTION: System shutdown using this button DOES NOT
disconnect the Voluson E-Series from mains voltage!
ON/OFF Standby button on control console
"Mains ON" Indicates the power on position of the mains power
switch.
rear of system at mains switch
(on power supply RSP)
"Protective Earth" Indicates the protective earth (grounding)
terminal.
rear of system at mains switch
(on power supply RSP)
"Equipotential" Indicates the terminal to be used for connecting
equipotential conductors when interconnecting (grounding) with
other equipment.
rear of system at mains switch
(on power supply RSP)
This symbol indicates that the device is equipped with hardware
for using Continuous Wave Doppler.
rear side of the system
This symbols indicate that the product contains hazardous
materials in excess of the limits established by the Chinese
standard GB/T 26572 Requirements of concentration limits for
certain restricted substances in electrical and electronic products.
rear side of the system
on the plug of each probe
Every system has a unique marking for identification, the Unique
Device Identification (UDI) Label. The UDI label consists of a
series of (alpha-) numeric characters and barcode which uniquely
identify the Voluson E-Series system as a medical device
manufactured by General Electric.
Identification and Rating Plate
(rear side of the system / on plug of each probe)
Upgraded systems
adjacent to the Rating Plate
The Common Mark of Products Circulation certifies that the
products bearing this mark, passed all conformity assessment
(approval) procedures.
Identification and Rating Plate
(rear side of the system)
Introduction
1-18
Voluson E-Series Service Manual
5539550APB Revision 6