Description of the System
3.2.2 Mechanical
Adjustment
The control console can be rotated 30° to the right.
TRANSPORT LOCK
There is a lever for locking and unlocking the control console, mounted at the front below the control
console. When preparing the system for transport, the lock shall be engaged in order to secure the
console against uncontrolled rotation. The bolt set to the locking position, the lock catches in when the
console is rotated to its center 0° position.
ROTATION OF THE CONTROL CONSOLE
When rotating the control console grasp it only at the front handle of the user interface.
1. Pull the lever under the control console forward.
2. Rotate the console to desired position.
WARNING:
•
Do not
put your hand between the control console and
the main unit when moving it to the 0 position:
Danger of injuries!
•
Do not pull or lift the system with the front handle of
the user interface.
MOVING OR LIFTING THE SYSTEM
When pulling, moving or lifting the system, grasp it only at
the rear handle of the trolley and the handle underneath the
foot rest.
CAUTION:
Two people are required whenever a part weighing 16 kg
(35 lb.) or more must be lifted.
Voluson
®
730 - Instruction Manual
105838 Rev. 3
3-5