GE Vivid E9, Service Manual

Page: 244 / 802

GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
5 - 54 Section 5-9 - Back End Processor (BEP)
5-9-5 CPU/Back End Processor (BEP) - block diagram
The wiring is somewhat different between the BEP5 and the BEP6, as illustrated in:
• Figure 5-38 - BEP6 block diagram
• Figure 5-39 - BEP5 block diagram
Figure 5-38 BEP6 block diagram
Figure 5-39 BEP5 block diagram
HDD
DVR
(OPTION)
GRAPHICS
ADAPTER
BEP6
POWER
BOARD
AUDIO L
AUDIO R
DVI-I
USB
USB
10/100/1000MbT
BW
PRINTER
DVD DRIVE
(DVR OPTION)
DVD DRIVE
WOOFER
USB
FROM MAIN
PWR SUPPLY
SATA
SATA
IO BOARD
MOTHERBOARD
LED
AUX
PHONO
ECG
BEP6
w
/4D and DVR
USB
POWER
PATIENT
IO
LED
LED
FRONT
PANEL
FROM
MAIN PWR SUPPLY
CONTROL SIGNAL TO
MAIN PWR SUPPLY
DVI Video, Audio, 2xUSB, 48V, Power ON/OFF switch, Safety GND,
Outer Boss Brake/Motor-Brake Commands
IPASS2
PCIE x1
TO GFI
FEP BACKPLANE CONNECTOR
TO FEP BACKPLANE AND TO GFI
VOLTAGE FROM POWER SUPPLY
CONTROL SIGNAL TO POWER SUPPLY
VOLTAGE FROM POWER SUPPLY
DVI Video, Audio, 2xUSB, 48V, Power ON/OFF
switch, Safety GND, Outer Boss Brake/Motor-
Brake Commands
NOTE:
ON VIVID E9 WITHOUT DVR, THE SHORT CABLE BETWEEN THE
GRAPHICS BOARD AND THE DVR IS MISSING, AND THE DVI OUT
CABLE FOR THE IO BOARD IS CONNECTED TO THE VIDEO CARD.
LED
LED
LED