GE VGM500 User Manual Download Page 39

Page: 39 / 44

¥ The time counter does not advance during unrecorded portions of tape.

When an unrecorded segment of tape is encountered, the time counter will
hold its count until recorded material is detected again.

¥ A minus (Ð) will appear in front of the time if you rewind the tape farther

back than a counter reading of

0:00:00

¥ No cassette in VCR.
¥ Eject and re-insert cassette.
¥ Broken tape Ñ try another cassette.

¥ Some snow/streaks are normal during search, frame advance, slow-motion,

or stop-action playback.

¥ VCR is in pause mode. Press

PAUSE.

¥ Safety tab removed from cassette.
¥ Make sure the line indicators (

and

) are turned off in VCRÕs display

panel for normal recording from the VCRÕs tuner. Press

INPUT

to turn off

the line indicator.

¥ Tape already rewound.

¥ Program entered incorrectly (wrong channel or times).
¥ Power interruption. Clock area in display panel will show

- -:- -

¥ Check to see if time and date are correct Ñ including

AM/PM

¥ Program exceeded tapeÕs length or tape was not rewound beforehand.
¥ VCR was not turned off at the time recording was to start.
¥ No tape in VCR or cassetteÕs safety tab broken off.
¥ Cable box not turned on at time recording was to begin.

¥ VCR is removing tape from heads. This is normal. The head cylinder inside

the VCR will continue to rotate for a few minutes after you put the VCR in
the stop mode.

¥ Check antenna connections.
¥ Check

Signal Type: CABLE/ANTENNA

feature.

See page 10

¥ Cable channels over 69 can only be selected if

Signal Type:

CABLE/ANTENNA

feature is set to

CABLE

Details are on page 10.

Reception: STEREO/MONO/SAP

feature must be set to

STEREO

to record

broadcast stereo.

See page 30.

Reception: STEREO/MONO/SAP

feature must be set to

SAP

to record SAP.

See page 30.

STEREO

SAP

indicator not on. Station not broadcasting stereo or SAP.

Tape Playback: HI-FI/LINEAR/MIX

feature must be set to

HI-FI

to hear stereo

sound during playback.

See page 19.

¥ Stereo signal is weak. Set

Reception: STEREO/MONO/SAP

feature to

MONO

References

Trouble

Here's what to try:

Time counter not working

Will not record or play

Streaks in picture during normal playback

Will not record

Rewind does not operate

Timer recording not made
or wrong program recorded

VCR makes noise when stopped

Will not auto search active
channels correctly

Cannot select channels over 69

Stereo or SAP sound not recorded

No stereo sound during playback

Stereo audio too noisy

Summary of Contents for VGM500













































Search results

Summary of Contents for VGM500

Reviews:

Related manuals for VGM500

Brands by name

Popular brands

GE VGM500, User Manual

Search results

Summary of Contents for VGM500

Reviews:

Related manuals for VGM500

Brands by name

Popular brands