28
References
Location of Controls
Back Panel
3CH.4
Switch
Selects the channel to which you tune the TV to see
the VCR picture if you connect the VCR using one
of the basic hookups.
IN FROM ANT.
(Antenna) Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV
Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN
and
AUDIO1 (R and L) IN
Jacks
Receive signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use
INPUT
(channel 00) on the remote
to select.
VIDEO1 OUT
and
AUDIO1 (R and L) OUT
Jacks
Send signals from VCR to another component like
a TV, VCR or camcorder when it is connected to
these jacks.
3 CH. 4
VIDEO
R-AUDIO-L
IN 1
OUT
IN FROM
ANT.
OUT TO TV
VHF/UHF
MONO
Hi-Fi
Indicator
Lights when
TAPE PLAYBACK
feature is set to
HI-FI
.
POWER
Indicator
Lights when the VCR is turned on.
Time, Channel Number, or Line Input
(L)
The current time is displayed. Only the
AM
indicator appears; when the time is
PM
, no
indicator appears.
The channel number or line input is displayed.
Pressing
INPUT
or channel 0, 0 on the remote
displays the line input indicator to record from the
VIDEO1
and
AUDIO1 IN
jacks
STATUS
Indicators
PLAY
A tape is playing.
REC
A tape is recording
REW
A tape is rewinding.
FF
A tape is fast forwarding.
STOP
A tape is stopped.
Display Panel
TIMER
Indicator
Shows VCR is set for timer recording when VCR is
turned off.
Flashes when a timer recording is set and there is
no cassette in the VCR.
VCR
Indicator
Lights when using the
TV•VCR
button.
When using one of the basic hookups:
•
The picture is coming from the VCR when the
VCR
indicator is on.
•
The picture is coming from the television
channels when the
VCR
indicator is off.
A
M
TIMER
VCR Hi•Fi
Current Time, Channel Number, or Line Indicator (
L
), or Status
Power Indicator
Hi-Fi
Indicator
VCR
Indicator
Timer Indicator
