GE VG4061 User Manual Download

Page: 43 / 60

CONNECTIONS

Things to Know Before Connecting
Components

Protect Your Components from Power Surges

•

Connect all components before plugging any
power cords into the wall outlet.

•

Always turn off the TV and other components before
you connect or disconnect any cables.

Position Cables Correctly to Avoid Audio Hum
or Interference

•

Insert all cable plugs firmly into their jacks.

•

Place the audio/video cables to the sides of the TV’s
back panel instead of straight down the middle
after you connect your components.

•

Try not to coil any twin-lead cables and keep them
away from the audio/video cables as much as
possible.

•

Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed with
your unit.

Protect Your Components from Overheating

•

Do not block ventilation holes in any of the
components. Arrange the components so that air
can circulate freely.

•

Do not stack components.

•

Allow adequate ventilation when placing your
components in a stand.

•

Place an amplifier or satellite receiver on the top
shelf of the stand so heated air rising from it will not
flow around other components.

➣

SETTING UP THE VCR

FIRST THINGS FIRST

➣

RECORDING

VCR BASICS

➣

OTHER FEATURES

CONNECTIONS

➣

PROGRAMMING THE
REMOTE

Summary of Contents for VG4061





























































Search results

Summary of Contents for VG4061

Reviews:

Related manuals for VG4061

Brands by name

Popular brands

GE VG4061, User Manual

Search results

Summary of Contents for VG4061

Reviews:

Related manuals for VG4061

Brands by name

Popular brands